MicrostockGroup

From what I've read, you want to stick with the "180 degree" rule involving shutter speed. Also, most video shooters on cinema5d suggest turning sharpness down to 0 or even lower. That website is a fantastic resource (without much snarkiness!) for newbie videographers.

Adorama is starting a series of dslr video tuts on vimeo its a good introduction and the fisrts video addresses the 180 rule and describes jello effect etc.

adorama on vimeo

If your doing video for stock definately shut off as many in camera effects as possible ie sharpening

Always shoot in "M" and always shoot at a shutter speed that is twice your frame rate, so 1/60th if you're shooting 30 frames per second. In film language this is called a "180 degree shutter" and gives the most natural, cinematic motion blur. If your shot is overexposed at 1/60th, you can close the aperture or use an ND filter. Setting the shutter speed higher to 1/200 for example gives a very unnatural, stroboscopic effect (like the beach scenes in Saving Private Ryan) shooting lower at 1/30th for example gives too much motion blur, and your footage looks like bad cellphone video.

Never shoot in AWB, even if you think that it looks OK on the LCD. The camera will change the white balance on you slightly during recording, and ruin your shot.

Don't do fast pans or shoot objects that are moving quickly horizontally through the frame, or you'll fall victim to the dreaded rolling-shutter "jello effect"


You now have a decision to make:

1) shoot flat to grade later. This means setting up a custom picture style that decreases contrast in order to maximize dynamic range so that you have more data to work with in colour correction. The closest thing to RAW video you're going to get on this camera. Watch this video.

2) shoot rich to avoid grading. This means upping contrast and saturation a little in camera so that you can shoot, convert, and upload, without doing colour correction on your computer. Not great for a film, maybe a good strategy for a streamlined stock workflow.