Author Topic: best hardware and operating system for 3d software (Read 9740 times)

chl · « **on:** July 20, 2009, 22:05 »

Hay guys,

I would like to check which is the best processor to work with 3d software? Is window XP 64 bit better than window XP 32 bit work better with 3d software?

Phil · « **Reply #1 on:** July 20, 2009, 22:28 »

by many accounts xp 64 was not real reliable and had many issues at the first least you will want to check very carefully that drivers for every piece of the machine is available. imo Vista 64 (and then strip down / tweak) would be a much better bet if you want more than 3.5 gbs of ram.

tomshardwareguide.com is the place for advise on hardware, they do many tests including for many of the 3d softwares. really comes down to how much you want to spend.

chl · « **Reply #2 on:** July 21, 2009, 01:40 »

Dear Phil

Thank you for the information. If for processor of core 7i which operating system you would recommend? vista 32 bit or 64 bit?

Phil · « **Reply #3 on:** July 21, 2009, 04:32 »

sorry I am not really up on the current hardware & processors. I went to 8gb of ram early in the year and got told everywhere to go vista not xp. to my thinking the main advantage of the 64bit is to be able to address more memory the 3.5gb that vista32 allows. I really dont know what advantages there are if any to 64 bit operating system as far as processor goes.

check software carefully for 64 bit compatibility, found a few of the programs I use wont run or run badly in 64bit. Also in photoshop (if you use it) many plugins dont support the 64bit version so if you want to run them you have to fire up the 32bit version of pshop which in my case loses many of the advantages of going 64 bit.

chl · « **Reply #4 on:** July 22, 2009, 07:59 »

thankyou for the advice

I guess I should go for 32bit.

chl · « **Reply #5 on:** July 22, 2009, 08:19 »

apart from the processor, do you think the video/graphic card affect the speed of rendering?

michealo · « **Reply #6 on:** July 22, 2009, 08:46 »

Quote from: chl on July 22, 2009, 08:19

apart from the processor, do you think the video/graphic card affect the speed of rendering?

yes many system components make a difference RAM, Bus speeds, processor cache, video card, hard disk size, hard disk numbers, etc

click_click · « **Reply #7 on:** July 22, 2009, 10:54 »

Quote from: chl on July 20, 2009, 22:05

Hay guys,
I would like to check which is the best processor to work with 3d software? Is window XP 64 bit better than window XP 32 bit work better with 3d software?

I think you have to ask the question in a 3D forum that specializes in the software that you are going to use on your computer.

I'm running 3DS 2009 on a Dell with 4GB RAM and 6600 Quad Core, Win XP Media Center Edition - it's way too slow for me.

These days I wouldn't go below 8GB of RAM and a fast Quad Core if not a proper workstation with two multi-core processors and for sure 64-Bit OS.

But you will get a lot more good info on a special forum.

Microbius · « **Reply #8 on:** July 23, 2009, 03:52 »

I'm running 8Gb RAM and i7 processor. Vista 64 bit. Great with the C4D11 and ZBrush 3, both do make use of the 64 OS. I would defo go vista and 64 bit, just make sure your software is compatible. Also different versions of Vista support different maximum amounts of RAM. Do a Google search and make sure whichever OS you have supports the amount of RAM you have.

Phil · « **Reply #9 on:** July 23, 2009, 04:14 »

should have said too that the hard drive is usually the slowest part of any pc so usually the faster the better

Fran · « **Reply #10 on:** July 23, 2009, 04:17 »

Quote from: chl on July 22, 2009, 07:59

thankyou for the advice

I guess I should go for 32bit.

I'd definitely go for Vista 64 and upgrade to Seven 64 as soon as it's available.

click_click · « **Reply #11 on:** July 23, 2009, 06:57 »

Quote from: Phil on July 23, 2009, 04:14

should have said too that the hard drive is usually the slowest part of any pc so usually the faster the better

It wouldn't hurt to get an SSD for that part. But do a lot of research on those, there are different ones!

chl · « **Reply #12 on:** July 23, 2009, 08:45 »

window 7 and VISTA can support up to how many RAM??

ayzek · « **Reply #13 on:** July 24, 2009, 04:06 »

i suggest vista 64 with 6 GB ram. apps are not using more than 3 GB ram. for windows and other apps keep 2 GB more so 6 GB is more than enough. Graphic Cards are not effecting your render time its effectting whille you are using apps. i also prefer not to buy expensive than 200$ cards. Graphic Cards that has got 512 MB or 1GB ram, 256 bit and more than 500mhz cpuspeed should be enough. For faster renders you need to have quad core cpu (i7 is better but expensive) with high GHz and also memory MHz is effecting render times realy much.

chl · « **Reply #14 on:** July 24, 2009, 05:32 »

Is core 7i processor better than quad core? What is the maximum RAM it could support?

ayzek · « **Reply #15 on:** July 24, 2009, 07:14 »

http://www.tomshardware.co.uk/charts/2009-desktop-cpu-charts/3DS-Max-2009,1380.html
you can find also some other aplication benchmarks.

click_click · « **Reply #16 on:** July 24, 2009, 07:48 »

Look, if you will be using Autodesk software go here:

http://area.autodesk.com/forum

There are very helpful and knowledgeable members there. Some of them are highly trained professionals. Most of them build their computer around the application. They will tell you exactly what to get.

But do your homework, you need to have some basic knowledge about Operating Systems, hardware and software which you can find all over the internet. Just do some research!

MicrostockGroup Sponsors

Author Topic: best hardware and operating system for 3d software (Read 9740 times)

chl

Phil

chl

Phil

chl

chl

michealo

click_click

Microbius

Phil

Fran

click_click

chl

ayzek

chl

ayzek

click_click

Related Topics

Sponsors

Microstock Poll Results

Sponsors