MicrostockGroup Sponsors
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - mtkang
Pages: 1 ... 3 4 5 6 7 [8] 9 10 11 12 13 ... 48
176
« on: March 19, 2013, 03:50 »
I select the box and made the artboard fit to the 'transparent' box, and delete the transparent frame.
I assume some eps buyer will just open the file like in photoshop, but it is always clipped to the edge of the vector instead of the edge of artboard.
Can't really figure out what is the solution..
177
« on: March 18, 2013, 07:52 »
oic..i guess with a correct artboard setting, a transparent box is not necessary..
will google internet..thanks!
178
« on: March 18, 2013, 06:42 »
this is the box i mean:
179
« on: March 18, 2013, 06:25 »
Hi Davidgoh, Do you add a 'transparent' box around your vector? I have no problem to generate jpg out of illustrator or photoshop.. in order to get the raster jpg same as the eps vector, I don't know any method other than adding the 'transparent' box with no filled and no line. I hope i explain it good enough.. Hi all,
I usually make a 'box' with no line, and no fills that 'frame' my eps vector..so there are so space around the vector when it is rasterize as jpg in photoshop or other application..
I got some rejections sometimes saying i should remove the 'white shape' in the background as it will cause some problems for some applications.
I convert the shape as 'artboard'..and no more shape.
but if i open in an application, there are no space around the eps vector..and it is like cropping to the maximum.
I don't like how it shows as preview..and a vector that touching border with no space.
If my method is wrong, what is the way to do it?
any adobe illustrators expert can give me a hint? thanks!
Hey there! I'm a vector artist and I think I know your pains. When I first started out, I had this issue as well.
I've personally found that the fastest and easiest way to save a JPG of your file is to use the "Save for Web & Devices" Command under Adobe Illustrator (You are using Illustrator, right?). Under the "Image Size" Tab to the right, set your required dimensions, and be sure to turn on "Clip to Artboard" and you should be good to go.
I hope this helps. If you're insistent on opening a file in a raster program such as Photoshop, doing so will open up a prompt on your required dimensions and other details. under "Page Options" and the drop down Menu "Crop To:", set to "Bounding Box" (It's set to Media Box by default, which ignores your art board.) Be warned though that rasterizing in Photoshop can sometimes change colour information, which is why I recommend using Illustrator's innate "Save for Web" command.
180
« on: March 17, 2013, 18:17 »
I thought there shouldn't have any layers in eps file? so there is s still a white box? I was using 'crop' function sometimes, but it is not available in new AI anymore. what is the right way to do it? I was having issues as well. Now as an indie, I am having the task to re- prepare my vector files to upload to as many different agencies as possible.
I make a white box the size of the art board and lock that layer. Then the art goes on a layer on top.
There is still hundreds of vector eps files I need to make adjustments to like included iptc data to. I never needed to do it when uploading to istock exclusively.
181
« on: March 17, 2013, 12:00 »
Hi all,
I usually make a 'box' with no line, and no fills that 'frame' my eps vector..so there are so space around the vector when it is rasterize as jpg in photoshop or other application..
I got some rejections sometimes saying i should remove the 'white shape' in the background as it will cause some problems for some applications.
I convert the shape as 'artboard'..and no more shape.
but if i open in an application, there are no space around the eps vector..and it is like cropping to the maximum.
I don't like how it shows as preview..and a vector that touching border with no space.
If my method is wrong, what is the way to do it?
any adobe illustrators expert can give me a hint? thanks!
182
« on: March 16, 2013, 08:30 »
dreamstime seems like the only agency who up down a lot and doesn't really grow with my portfolio size..
183
« on: March 16, 2013, 03:33 »
i think the message usually means there is raster images in the eps files..
i think there is a tool to check raster image in eps files..
185
« on: March 14, 2013, 10:10 »
ha, never heard about it... somehow the list is quite interesting. May not be useful..but maybe will bring in some traffic to dreamstime.. List is still indexing from latest photos to older cameras. it isn't complete yet. It will show up eventually. I'm waiting for my NeinGrenze 5000T to show up, I'm pretty sure I'm the only one using that camera.
186
« on: March 14, 2013, 10:05 »
to be fair, 123rf is actually one of the stable agency for me..and sales is increasing in my case.
I am sure some guys are seeing the same results..
187
« on: March 14, 2013, 09:53 »
i thought nikon D7000 is quite a good and popular camera..why it is not in the list? does it market as another model?
188
« on: March 13, 2013, 09:09 »
it seems only chinese interface..
there is no way to have access of the 123rf.com? in china?
189
« on: March 13, 2013, 01:25 »
hi guys, any problem have an access the site in china? I seem can't have an access to the page..with message: This webpage is not available The webpage at http://www.123rf.com/ might be temporarily down or it may have moved permanently to a new web address. Error 103 (net::ERR_CONNECTION_ABORTED): Unknown error.
190
« on: March 11, 2013, 09:34 »
it works! thanks! OK, Cycles. I was using BI. I just tried checking Transparent on the film subpanel of the Render panel, with output set to PNG/RGBA and it rendered with a transparent background using Cycles.
191
« on: March 11, 2013, 07:34 »
thank you very much! OK, Cycles. I was using BI. I just tried checking Transparent on the film subpanel of the Render panel, with output set to PNG/RGBA and it rendered with a transparent background using Cycles.
192
« on: March 11, 2013, 04:27 »
Hi, the 'triangle button' is under 'output' tab under the 'scene'? by the way i am rendering it with cycles..i wonder does it make a difference. I can render the output with a dark grey background which easy to remove from photoshop, but i wonder how to turn it to transparent in blender. When you got to the step after rendering, but before saving, pressing the (triangle button)lower right side choose colors and alpha, did you see the background turn into a black and white square background, i.e. no background? Then you can save as a png that you can use in photoshop, to add a white background for an isolated object, or add into a composition.
193
« on: March 10, 2013, 20:08 »
hi all,
i try to render outpout as png, RGBA..and remove the backdrop.. and i got isolated dark grey background.
is it how blender render as isolated object? i can remove the dark grey background in photoshop..
how can i achieve the transparent background?
thanks.
194
« on: March 09, 2013, 23:55 »
I put a white backdrop at the back of my object.. should i remove it? if i remove it? I will try to render first.. I just rendered the default cube after setting the output to PNG/RGBA, and saved the resulting render. It opens in Photoshop as a cube with transparent background.
195
« on: March 09, 2013, 21:33 »
do i need to put the background and object on different layers? how would the system able to render a transparent background? thanks. Have you tried to change the output under the camera tab to png and choose RGBA button; render, then on the rendered window on the lower right side choose colors and alpha (triangle button), then save as image png
196
« on: March 06, 2013, 10:48 »
i am thinking if it is possible to generate during 3d render.. like to separate the object from background.
since it is a liquid..i may take sometimes to use pen tool to isolate in photoshop..
197
« on: March 06, 2013, 09:18 »
hi guys,
anyone is using blender?
I am trying to create some fluid.. and i am thinking if there is a way to isolate the fluid? so it will be useful for buyer?
I remember sth like alpha mask? is it same as masking in photoshop?
any guy can give some direction?
thanks.
198
« on: March 02, 2013, 09:34 »
oic..thank you very much. Yes, editorial footage needs to follow the same caption format.
199
« on: March 02, 2013, 06:52 »
hi all,
i know shutterstock asked for to follow a editorial caption format for editorial image, how about footage?
does it need to follow the caption format?
200
« on: March 02, 2013, 03:28 »
the populate button is not able to batch process multiple files same time right? i do use the populate button to assign categories..but one need to click agree and 'submit' for every files right? shutterstock..fotolia.. and every other site that you can move the similar files just by doing 1 time.. if you have 10 image from same situation, why need to repeat 10 times? basically the worst submit is istock, and dreamstime is second.. it takes more than one year for them to admit a mistake and realize it is lost lost situation for everyone..
and how about the batch edit process?
even fotolia had a batch process.. nowadays a lot of ppl start as 1000k portfolio..not really just some weekend hobbies..
Do you use the populate button? Makes it all a lot quicker, especially or catagories and model releases.
Pages: 1 ... 3 4 5 6 7 [8] 9 10 11 12 13 ... 48
|
Sponsors
Microstock Poll Results
Sponsors
|