MicrostockGroup

Agency Based Discussion => Shutterstock.com => Topic started by: Carmel12 on July 31, 2013, 19:10

Title: "Lighting Problems"
Post by: Carmel12 on July 31, 2013, 19:10

Hi
When you get a rejection from Shutterstock for "lighting problems", what is the first thing you typically do to correct it?

Ruth

Title: Re: "Lighting Problems"
Post by: ruxpriencdiam on July 31, 2013, 19:20

Quote from: Carmel12 on July 31, 2013, 19:10

Hi
When you get a rejection from Shutterstock for "lighting problems", what is the first thing you typically do to correct it?

Ruth

Look closely at the rejection.

Reason being is that it is a three part rejection so you must figure out which one or more of the three you must fix?

Title: Re: "Lighting Problems"
Post by: icefront on July 31, 2013, 19:21

1. Levels
2. Curves
3. Shadow/highlights -> shadows
- or if none of the above works -
4. Selective levels/curves on the forté areas of the image.

Title: Re: "Lighting Problems"
Post by: JPSDK on July 31, 2013, 19:39

1.. Deep black shadows or burned out areas
2.. Not correct white balance
3...Uneven light, where there is more light on one side of the object

Title: Re: "Lighting Problems"
Post by: Carmel12 on July 31, 2013, 19:41

Then I guess I'm on the right track.  Just needed some reassurance that I was on target in fixing the problem.  Many thanks.

Title: Re: "Lighting Problems"
Post by: Beppe Grillo on August 01, 2013, 00:05

1) Dark shadows

2) But mainly burnt out highlights, even very little zones
(cmyk 0,0,0,0 - RGB 255,255,255 - % 100,100,100).
These will become "paper color" if you print it and it is not good.
For offset printing (magazines, catalogs, etc) the white should not exceed 95-97% (3-5% if you measure in cmyk)
(I am not speaking of an "isolation white", this one must be 100% white)

Title: Re: "Lighting Problems"
Post by: tab62 on August 01, 2013, 09:36

"When you get a rejection from Shutterstock for "lighting problems", what is the first thing you typically do to correct it?"

Typically you link a photo for us to look at first since this question is way too broad to answer correctly.  Just consider how we have to try to answer this question- 1. was it out doors, 2. In a studio - what was your lighting source? What time of day were you shooting?  As far as we know you may have even had the lens cap on during the photo session since we have no photo or enough details to even attempt to answer this question...

T

Title: Re: "Lighting Problems"
Post by: stockastic on August 01, 2013, 14:29

Just edit the IPTC to say "Taken by my new iPhone 6!" and resubmit.

Title: Re: "Lighting Problems"
Post by: tab62 on August 01, 2013, 15:28

"Just edit the IPTC to say "Taken by my new iPhone 6!" and resubmit."

See, now this was a simple answer!


Next Question!