Author Topic: How to set-up newtorking (Read 1746 times)

grsphoto · « **on:** April 13, 2013, 10:28 »

I have just spent 20 minutes or so looking for the information on settings you need to allow networking with your 5 sites.

What are the steps needed to make it work.

steheap · « **Reply #1 on:** April 13, 2013, 10:33 »

Newtorking - that is a new feature!

Anyway, networking is set up in the Network tab of Symbiostock in the admin page. There are spaces for five sites that will form part of your network, and at the foot of the page is a button that activates the Symbio network. Don't forget to save the changes.

You can then test it by searching for a common keyword like landscape.

Steve

klsbear · « **Reply #2 on:** April 13, 2013, 10:34 »

Go to the Symbiostock section on your dashboard and select the Network tab at the top (1st tab). Way down at the bottom you'll see a radio-button selection to activate or deactivate the network. Select Activate and save. You should now see five blank network fields to fill in at the top that says Connected Sites. Paste in the URL's of your chosen network sites and save.

I was having some problems getting the Activate button to actually activate the network at first for some reason. I may not have been saving and refreshing the screen, but after a couple of tries it activated and showed the fields to enter connected sites.

farbled · « **Reply #3 on:** April 13, 2013, 11:07 »

Here's Leo's set up vid for it:

http://www.clipartillustration.com/freefiles/tutorials/1.swf

grsphoto · « **Reply #4 on:** April 13, 2013, 11:38 »

Thanks Now I know how it is supposed to work I have made it work...

The problem was when I click activate two save changes appeared... one which did nothing.
Now that I know what is supposed to be I kept clicking until it worked.

farbled · « **Reply #5 on:** April 13, 2013, 12:01 »

Quote from: grsphoto on April 13, 2013, 11:38

Thanks Now I know how it is supposed to work I have made it work...

The problem was when I click activate two save changes appeared... one which did nothing.
Now that I know what is supposed to be I kept clicking until it worked.

That got me for a while too. I forgot about that.

grsphoto · « **Reply #6 on:** April 13, 2013, 13:07 »

Quote from: farbled on April 13, 2013, 12:01

Quote from: grsphoto on April 13, 2013, 11:38
Thanks Now I know how it is supposed to work I have made it work...

The problem was when I click activate two save changes appeared... one which did nothing.
Now that I know what is supposed to be I kept clicking until it worked.
That got me for a while too. I forgot about that.

OK we will just keep this thread here so that others can find it....

cathyslife · « **Reply #7 on:** April 15, 2013, 17:49 »

Yep i just had issues activating...it kept adding save changes buttons...i had about five of them. After rereading this thread, i got it to work. Clicking save changes, waiting until it was done, then refreshing did the trick.

Leo Blanchette · « **Reply #8 on:** April 15, 2013, 17:51 »

I also fixed a bug which might hamper all of that stuff too. Hope to have it out tonight.

MicrostockGroup Sponsors

Author Topic: How to set-up newtorking (Read 1746 times)

grsphoto

steheap

klsbear

farbled

grsphoto

farbled

grsphoto

cathyslife

Leo Blanchette

Sponsors

Microstock Poll Results

Sponsors