Author Topic: Deposit Photos- MR not staying Put (Read 3474 times)

tab62 · « **on:** February 16, 2013, 20:59 »

OK, either I am drinking way too much or are my model releases keep disappearing from the DP release section? I add them and it works fine for one day but not there the next day. At .30C a pic it really isn't worth the effort if I have to upload each time...

fotografer · « **Reply #1 on:** February 17, 2013, 04:55 »

I found a work around until they fix it. Put the images through for review and then go and attatch the releases from there. For some reason the saved releases aren't showing in the unfinished section but they are showing in the pending section.

Mantis · « **Reply #2 on:** February 17, 2013, 10:15 »

I don't have a problem with the system not working. You have to now first go to "release manager" and declare which model releases are placed in the drop down menu to the left. There is a "yes" or "no". A yes will place that release into the drop down, a no will remove the release until such a time when you need it; then you'll have to go back to your release folder and click "yes" to any release you want to attach to an image and have in that drop down.

Pixart · « **Reply #3 on:** February 17, 2013, 11:49 »

Modified to read that the box on the left is NOT the release manager - I thought all my releases had vanished but in the Manager tab you have to click on the releases you want to show in the other box. It's a bit of a pain as it worked well before, you just typed in emi and Emily's release would come up. There isn't even a check-all box in the manager so you have to go through one at a time.

Mantis · « **Reply #4 on:** February 17, 2013, 12:04 »

Quote from: Pixart on February 17, 2013, 11:49

Modified to read that the box on the left is NOT the release manager - I thought all my releases had vanished but in the Manager tab you have to click on the releases you want to show in the other box. It's a bit of a pain as it worked well before, you just typed in emi and Emily's release would come up. There isn't even a check-all box in the manager so you have to go through one at a time.

I was referring to the drop down release box on the left, which is what you use to manage releases during image preparation, but, as you point out, isn't the release manager master. Thanks for clarifying.